eHouse WiFi devices are small all-in-one controllers which use existing WiFi network infrastructure (2.4GHz b/g/n) not requiring any other cabling except connecting power supply and controlled devices. Up to 250 controllers can be installed in single installation (network mask 255.255.255.0). WiFi coverage is required for wireless working all over controlled area (up to 3 different SSIDs).

“eHouse WiFi” controllers are wireless, using standard WiFi 2.4GHz b/g/n architecture which makes it ideal for installation in old building without any devastation. It is also very suitable for outside installations (sensors, outputs) – where putting wires would be very difficult, impossible, unsafe and very expensive. eHouse WiFi architecture is very suitable for system expansion in the future whenever new control, management, measurement device is necessary to extend the system.

eHouse WiFi controllers can work standalone and with PC/microcomputer support (eg. Raspberry Pi, RPI 2, Banana PRO, x86, x64). It is 100% compatible with eHouse LAN, eHouse PRO home automation systems and can be workaround in case of expanding systems or use wireless variants where cables are uneconomic or can’t be placed. eHouse WiFi can also create new home automation systems without devastation of the building as in wired systems. eHouse WiFi controllers are much more functional than eHouse LAN, eHouse RS-485 controllers (comparing to outputs, inputs, dimmers, measurement inputs).

eHouse WiFi can be supported with PC or any microcomputer system based on Linux ( eg. Raspberry Pi, Raspberry Pi 2, Banana Pi / PRO) operating system. Bundled software eHouse4cServer (partially Open Source) allows full control and system integration of eHouse WiFi with other versions of eHouse system eHouse : RS-485, LAN, PRO, CAN, RF and future products.
Apache web server software with eHouse4Apache module enables integration eHouse4CServer, eHouse.PRO which allows complete control, management from a Web browser. This way, the user has full choice of control panels, smartphones, Pads, Pods, Smart TV or web browser.
eHouse System is a modular, enabling optimal use of controllers , adjusting the installation to suit your needs and the planned budget. eHouse WiFi system is made in a decentralized wide area network architecture, allowing local control of individual points and minimizing electrical 230V wires length several times and repeatedly reduces the financial outlay for the installation compared to centralized systems.
eHouse WiFi are all-in-one smart controllers – have small dimensions (61*52*27mm) and can be mounted directly in light covers or near other devices. eHouse WiFi controller may contain up to 4 relays 230V/5A for direct switching of electrical appliances or power. It can contain up to 3 LED Dimmers 12V/2.5A each. It also may contain 230V power supply on board.

WiFi network coverage is assured by proper amount (one or more depending of size and architecture of object) and location of WiFi routers connected together with Ethernet cable for best results and stability. eHouse WiFi controller can use up to 3 independent network infrastructure (SSIDs/Passwords connecting to nearest/strongest).