The Intelligent House, Building Automation eHouse PRO can be controlled via Cloud eHouse Cloud .
This is another option besides direct access through eHouse for Java , Android (TCP / IP, UDP, SMS, eMail) and web browser.
One control method does not exclude another.
The following project is a centralized installation system with full access from outside. eHouse PRO demo project was discussed in earlier posts:
The installation realizes the complete automation of the building ~ 200m2 (ground floor, floor) – in the centralized version.
The system is based on eHouse PRO server for central switchboard (all inputs / outputs go to one main switchboard).
“Working in the cloud” is the synchronization of system data with the Web server and MySQL database.
Advantages of Cloud:
- Can work with any Internet connection without any restrictions
- does not require public access Internet
- Does not require a fixed IP address or DDNS service for the link
- No complicated configuration of NAT Internet Router, sharing and redirection of Ports, Servers, DMZ, etc.
- If you work on the web, it can be controlled from any device with a web browser
Disadvantages of Cloud:
- Higher link load and data transfer
- slower, refresh and delay than direct access (3 to tens of seconds of refresh)
- depends on the stability of the WWW/MySQL server
- loads the WWW/MySQL server and needs a large data transfer for each installation
To reduce disposing of the link and web server/MySQL, the refresh is set to 60 seconds when the client is not connected to the cloud. In case of connection and start up of the system command, the frequency increases (up to several dozen or so seconds) depending on the configuration.
Because it requires a web server, it is a paid service that depends on the amount of data transferred (transfer rate and refresh rate).
At: eHouse PRO + Cloud Building Automation is publicly available (without passwords) Centralized demonstration system installation. It is also an eHouse PRO test installation for BMS system integrators to test the system without eHouse hardware.
Because visualizations are in text files, it is easy to edit and change.
EHouse visualizations: Web visualizations – eHouse Building Automation
Creating visualizations: eHouse Building Automation
eHouse LAN, PRO, Wi-Fi Smart House can be integrated with any systems / devices and software through open protocol TCP/IP and UDP.
It is possible to send control commands to each eHouse LAN, Pro, WiFi controller using TCP/IP client application. To create your own software, there are 3 types of authentication to the controller:
- XOR Password – password hashed variable code received from the server
- plain password – a simple password
- No checking authorization – open access
It is required to set the minimum desired level of authorization for each controller configuration. Safer methods of authentication are also active for the visualization panels and eHouse system applications for configuration.
eHouse LAN, WiFi, PRO controllers send their status as the UDP broadcasts, so that any number of panels can receive this information in a common LAN.
More information: eHouse LAN Smart HouseOpen communication protocol.
eHouse home automation smart home equipment intelligent switching center, connecting the UPS, alarm sensors and inputs and electrical equipment regulations.
Continue reading eHouse.PRO Smart Building connection
eHouse.PRO Smart House professional distributor with the possibility of self-assembly.
eHouse.PRO Intelligent building for central switch-board: description of DIY for control whole building or floor.
Continue reading eHouse PRO Home Automation Central Switch-board DIY
Smart Home Raspberry Pi
Smart Home | intelligent Building on Raspberry Pi self-assembly.
Raspberry Pi is currently the most popular stand-alone microcomputer board running under Linux .
It is ideal as a cheap and efficient system server eHouse RS-485, CAN, LAN, eHouse.PRO.
It has a number of interfaces I2C, SPI extending the functionality of the buffers Inputs/Outputs and other accessories forming a gateway to the world and eHouse system integration. Continue reading Raspberry Pi smart home, intelligent building – DIY
Intelligent Building eHouse.PRO – DIY 2
eHouse.PRO Smart Home | intelligent Building .
A professional building automation system with the possibility of self-assembly: part two assembly description .
Continue reading eHouse.PRO Intelligent Building, Smart Home – DIY 2
eHouse.PRO Intelligent Building – DIY 1
Smart Home | intelligent Building eHouse.PRO.
A professional building automation system with the ability to self-assemble without any compromises pose a risk of damage , electric shock , fire , etc..
The system installed in the large central switching microprocessor controllers , accessories , relays without any electronics building automation in the walls and outside the switchboard,
making the system much easier to service much more resistant to damage.
Continue reading eHouse.PRO intelligent building – DIY
eHouse.PRO Intelligent Building configuration of intelligent digital outputs
eHouse.PRO Smart Home – functionality and configuration of intelligent digital outputs.
Digital outputs, available on the I/O module are fully support by eHouse.PRO server application Software (for Linux) and have a very high functionality.
Complete configuration is independent for each digital outputs and outputs programs and is can be upgrade with software revision eHouse.PRO server application.
The configuration is independent for each digital output ( on / off ) , Output Drive ( pair ) , etc..
Continue reading eHouse.Pro intelligent building, smart home – intelligent outputs
eHouse.PRO Intelligent Building configuration of intelligent digital inputs
eHouse.PRO Smart Home – functionality and configuration of intelligent digital inputs.
Digital inputs, available on the I/O module with full support of eHouse.PRO server application (for Linux) have a very high functionality. Complete configuration of the digital inputs is independent for each security zone / inputs programs and is loaded with its changing.
The configuration is independent for each digital input (on/off ), alarm output, etc..
Continue reading eHouse.PRO smart home intelligent inputs
eHouse.PRO smart home modules
eHouse.PRO Smart Home is a professional building automation system which allows very easy installation and do it yourself connection . Continue reading eHouse.PRO smart home I/O modules – DIY