Smart Home , building automation eHouse system – Example design for Living Room- control example project. Low voltage installation of eHouse smart home – LED lighting 12V – eHouse LED

• Room dimensions 8 * 6m ( 48m2 ) ceiling height of 3m
• Comfort version design having full automation and 100 % functionality of RoomManager or EthernetRoomManager – Lighting and heating
• underfloor heating 2 separate sections , adjustable floor temperature and air temperature in the room
• Low Voltage LED lighting only – 12VDC
• Fireplace with decorative lighting and forced hot air distribution
• Lighting control and automation for the entire Living Room
• IR remote control with SONY standard remote controller
• Audio hardware control , HiFi , video , TV , Sat with RoomManager
• control programs ( lighting and heating by electrical switches )

Suspended ceiling with drywall – cardboard luminaires fitted with G4 ( for 12V halogen ).

Wires were distributed at the stage of gypsum – cardboard panel installation and drilled holes for light fixtures G4 . Lighting fixtures installed just before painting the room .

Achieved functions of the system in the demonstration project :

• 15 independently controlled segments of the lighting ( light group ) Living
• 2 independently controlled lighting segments Terrace
• control two independent heating zones underfloor heating in the Salon
• Floor temperature control 2 independent heating zones
• independent heating block for two independent heating zones is exceeded the required temperature in the room
• automatic switching of night lighting at too low a level of lighting on the outside of the building ( at dusk )
• turning the speakers on the terrace
• automatically turning the fan forcing air circulation fireplace for heating
• lighting control , heating , outputs and all automation functions by Sony IR remote control

LED lighting designed as follows :

• Main lighting multipoint ( ceiling ) in shape of rings.
  Every section ( ring ) is controlled and activated by the two controller output ( even and odd lamps separately) .
  The distance between the rings 60cm .
• Placed centrally controlled RGB LED lighting dimmer RGB.
• Side lighting on all available walls are 3 types of decorative wall lights (colors red , blue , green) alternately incorporated individually.
• Automatic night lighting .
• Lighting over the couch.
• Main Lighting of terrace
• Discrete Lighting of terrace
• Diffuse lighting for watching TV LED strip for masking of gypsum board – cardboard
• Lighting LED strip for glass table. Lighting glass chest of drawers with decorative glass shelf , each a different color – LED strips .

Resource allocation RoomManager :

Dimmer 1 RGB 3 * 10W/12VDC without cover.

digital Outputs

• Lighting ( ceiling) LED ( 6 LED lights 1W / 12V warm white without cover ) 1 ring even ( A) .
• Lighting ( ceiling) LED (8 LEDs 1W / 12V warm white without cover ) 2 ring even ( B ) .
• Lighting ( ceiling) LED (12 LEDs 1W / 12V warm white without cover ) 3 ring even ( C) .
• Lighting ( ceiling) LED (16 LEDs 1W / 12V warm white without cover ) 4 ring even ( D) .
• Side lighting shining up 10 LEDs 1W / 12V blue without cover .
• Side lighting shining up 10 LEDs 1W / 12V red no cover .
• Side lighting shining up 10 LEDs 1W / 12V green without cover .
• Lighting over the couch (ceiling ) 8 LEDs 1W / 12V warm white without cover ) .
• Television Lighting LED strip 12V / White 2m for masking of gypsum board – cardboard .
• Decorative lighting furniture with stained glass decorative glass processed using LED strips 3 different colors . Lighting glass table LED strip 12VDC .
• Lighting ( ceiling) LED ( 6 LED lights 1W / 12V warm white without cover ) 1 ring odd (A) .
• Lighting ( ceiling) LED (8 LEDs 1W / 12V warm white without cover ) 2 ring odd (B) .
• Lighting ( ceiling) LED (12 LEDs 1W / 12V warm white without cover ) 3 ring odd (C) .
• Lighting ( ceiling) LED (16 LEDs 1W / 12V warm white without cover ) 4 ring odd (D ) .
• Night lighting one light above the entrance to the living room and routes – 1W / 12V blue .
• Decorative lighting for fireplace – LED red tape .
• Terrace off the living room lights LED strip at around terrace ( ceiling) .
• Lighting terrace 50 LEDs 1W / 12V warm white without cover (ceiling ) .
• Turn off/on speakers on the terrace .
• Unlocking the heating section 1 of underfloor (air temperature 1 ) .
• Unlocking the heating section 2 of podłogówki (air temperature 2 ) .
• Fan air circulation around the fireplace .
• Solenoid underfloor heating section 1 ( floor temperature 1 ) .
• Solenoid underfloor heating section 2 ( floor temperature 2 ) .

Measuring inputs

• Measuring the level of lighting on the outside unlock night lighting and motion sensors .
• Temperature measurement salon 1 point (control 1 heating section – unlock) .
• Temperature measurement salon 2 point (control 2 heating section – unlock) .
• Floor temperature measurement 1 point (control 1 section of floor heating ) .
• Floor temperature measurement point 2 (control 2 section of floor heating ) .
• Temperature measurement above the fireplace (control fan forcing air circulation .
• Measurement of the temperature outside North ( Information ) .
• Measurement of the temperature outside the South ( Information ) .

Digital inputs ( switches)

• program 1 – Full lighting ( 1 Enable the user profile lighting + segments heating temperature thresholds ) .
• program 2 – watching Television .
• program 3 – Lighting high level .
• program 4 – Lighting average .
• program 5 – Lighting low .
• program 6 – Discreet lighting .
• Program 7 (Night ) .
• Motion Sensor ( inclusion of the lateral wall lamps for 30min) (Optional ) .
• increment heating 0.5st
• decrement heating -0.5st
• Turn off/on speakers on the terrace .
• Illumination Terrace On/Off

Sketch deployment of elements of lighting and building automation A simplified circuit diagram of the building automation segment control eHouse living by . this demonstration project .