Applications

eHouse smart Camper – automation for caravans, cottages

Automation Campers , caravans , mobile residential

system
Smart Home eHouse version of Ethernet or ” eHouse 1 ” well suited for managing installations :

  • campers
  • caravans
  • cottages
  • mobile objects


For multi-apartment was nice, recreation , comfortable not annoying especially when several person group, should apply automation greatly increasing the comfort of use of such facilities.

The use of automation camper this is critical in order to:

  • increase the comfort of living in caravans
  • reduction of energy consumption of battery
  • provide automatic heating sleeper cabs
  • provide an automatic night light
  • measurement of the outside temperature , water , weather conditions , etc..
  • increase the safety of camper, protection of property
  • providing GSM alarm notification for objects

In fact, one room controller – RoomManager ( Smart Home eHouse1 ) / EthernetRoomManager ( eHouse Intelligent Home Ethernet) Can successfully implement automation for caravans, unless you intend to install security system . When we intend to further include a Set, it should be CommManager.
In the case of more “sophisticated” ideas and dedicated software should install eHousecServer (Linux ) and I/O modules (Input/Output) , measuring and write dedicated software integrated with eHouseCServer / eHouse.PRO .
In the second case, the server eHouse system can additionally :

  • play and control music playback, videos and other media on the local hardware Audio/Video
  • Integrate system with infrared remote control as standard Sony and define individual remote control buttons and their functions ( as eHouse system events and the control of external software based on Linux)
  • receive and process weather messages
  • advanced control devices over a LAN or other interfaces
  • monitor GPS position and send an email or SMS reports (especially in the case of chartered camper )

This will allow camper users with a relatively small financial outlay to enjoy the convenience of comfort , automation , heating , Cooling and feel safe while sleeping as well as leaving the camper without care .

Below are solutions , that can be used in caravans :

Programmable control outputs ERM (24 ) / RM (24 ) / CM (77 + Alarm { siren , lighting , monitoring , early warning } ) .
Control outputs can be connected via relays any electrical appliances to any voltage :

  • LED lighting in cabins – several pieces
  • LED lighting luggage compartments , cabinets , etc.
  • bathroom lighting
  • water pump control
  • dirty water pump control
  • Night lighting , interior and exterior
  • lighting parking
  • controlled (blocked ) socket 230V or 12VDC (especially external)
  • decorative lighting LED / RGB
  • night lighting cabin
  • control of mechanical ventilation in cabins , bathroom , kitchen , WC (based on humidity measurement , CO , CO2 and temperature )
  • heating control based on temperature measurements ( heating control )
  • night lighting control based on the measured light level
  • kitchen fan control – automatically ( by measuring the temperature of the gas stove )
  • the bathroom fan control – automatically after the entry

Programmable inputs (digital ) ERM (12) / RM (12) / CM (48) can be used , inter alia, to connect switches or sensors (on/off ) :

  • turning ordinary lighting and LED , LED – RGB individually or programs
  • inclusion of heating programs ( measuring – regulatory )
  • connection of digital sensors (on / off ), eg . flooding , CO , CO2 , gas , humidity
  • connection of reed confirming the closure of hatches , compartments , windows , chambers , door , sunroofs
  • PIR motion sensor connection – for motion detection and automatic execution of events ( eg . turning on the fan , turning on the lights )
  • connection of motion sensors PIR and microwave (dual ) external – to the alarm

Measuring inputs (analog) ERM (8) , RM (8) / cm (16) for measuring voltage on the measuring sensors e.g..:

  • temperature measurement in the cabins (for regulation and control of heating)
  • the outside temperature
  • water temperature
  • measuring the level of illumination ( for regulation and control of lighting , eg . night )
  • measurement of the force of the wind
  • measurement of humidity in the cabin
  • measurement of battery voltage

The need for specific control elements must be individually choose considering the application and type:

  • mobile object or static
  • Type: camper , Caravan , cottage
  • object its own or chartered (for rent)
  • apartment, sleeping
  • the required level of comfort, WC , bathroom , hot water , heating , cooling , ventilation
  • use depends on the season (summer only , Also in other seasons )
  • planned length of residence and travel ( the longer the greater convenience is needed )